Results 1 to 1 of 1

Thread: Mackie Onyx 24.4 Mixer for sale $1,500

  1. #1

    User Info Menu

    Mackie Onyx 24.4 Mixer for sale $1,500

    Used in a Studio environment, well-maintained. Selling as moving out.
    Contact 98150670 to deal. Delivery option available.

    If not familiar with this powerful mixer, pls read the below:

    Mackie Onyx 24x4 Analog Live Mixer at a Glance:
    20 Onyx microphone preamps
    Redesigned Analog Circuitry
    4-band Perkins EQ
    Built-in stereo compressor/limiter
    20 Onyx Microphone Preamps
    The Onyx 24x4 analog mixer is loaded with Mackie's flagship Onyx mic preamps, offering excellent fidelity, headroom, and transparency. With specs like 123dB total dynamic range, -129.5 dBm Equivalent Input Noise, and 0.0007% Total Harmonic Distortion, Onyx preamps hold their own against boutique standalone mic pres. When you need crystal-clear fidelity, look no further than the Mackie Onyx 24x4 mixer with its superb mic pres.

    Redesigned Analog Circuitry
    Mackie spared no expense developing the Onyx 24x4 analog mixer, pulling together some of the highest-quality components available-from premium op-amps to IC chips costing exponentially more than those used in previous designs. All-new summing bus circuitry was designed from the ground up to maximize the Onyx 24x4's headroom. And the entire signal chain was electronically balanced from input to output, offering big, full-range sound and lower noise than many mixers in this class. Most significantly, premium Onyx mic preamps, Perkins EQ circuitry, and a THAT Corporation 4301 assignable stereo compressor/ limiter chip were custom tailored specifically for these new consoles.

    4-band Perkins EQ
    Mackie enlisted the aid of veteran audio engineer Cal Perkins to design the EQ circuit for the Onyx 24x4 live console. The Perkins EQ is built on the classic Wein Bridge circuit topology used in British consoles during the '60s and '70s, but offers increased filter and phase shift control. The end result is an extremely musical and very effective 4-band EQ with sweepable low- and high-mids, making the Onyx 24x4 a perfect for mixing live sound.

    Built-in Stereo Compressor/Limiter
    Compression and limiting have been a live sound tool for years, so Mackie decided to built one into the circuitry of the Onyx 24x4 mixer. And not just any compressor/limiter chip would do, so Mackie chose a high-quality master compressor/limiter chip from THAT Corporation for the Onyx 24x4. This assignable analog stereo compressor/limiter chip was designed and manufactured in the US by veteran analog engineers, offering true RMS Detection and Auto Make-up Gain for extremely accurate and musical results. It features independent Threshold, Ratio and Fast/Slow Attack controls, and can be assigned post-fader to the L/R main mix (for system limiting and protection) or pre-fader to Group 1 / 2 or 3 / 4 outputs (for grouped signal compression, like drums or background vocals). This reduces the hassle and expense of separate outboard processing.

    On the rear of each Onyx console are DB-25 female connectors (in groups of eight), which can be used to route all mic/line signals to an external device. These connectors are configured with standard TASCAM pin outs. All of these balanced direct outputs are pre-fader and switchable via internal jumpers as either pre- or post-EQ. These outputs are ideal for multi-track live recording.

    Mackie Onyx 24x4 Analog Live Mixer Features:
    20 Onyx microphone preamps
    4-band Perkins EQ
    6 x 2 matrix provides 2 additional mixes
    6 Aux sends with Pre/Post switches
    100mm Panasonic Faders
    Built-in stereo compressor/limiter
    Last edited by kopi-o; 27-12-18 at 01:58 AM.

Tags for this Thread

Posting Permissions