wood&nickel
New member
The MSR100 offers compact size, big sound, and a range of versatile features. Power and superb audio quality deliver a solid sonic punch that is ideal for a variety of applications. And because it's so compact and lightweight, not to mention easy to set up, it's perfect when you need an easily transportable live sound setup that will perform flawlessly just about anywhere.
The 100-watt power amplifier built into the MSR100 delivers plenty of punch so you'll be heard with full dynamic range and clarity. This specially designed amplifier has been optimized for use with the MSR100 speakers to provide the clearest, cleanest sound possible. An 8" custom woofer handles the low frequencies, while a 1" titanium diaphragm compression driver delivers the highs. The high-frequency horn features wide 90o x 40o dispersion for optimum audience coverage.
A selection of inputs and basic sound control features make the MSR100 ideal for small events and club gigs. A simple but effective mixer built into the rear of the unit provides 3 inputs with master EQ for sound control. The "Input 1" XLR connector accommodates almost any microphone or line input (with a -50dB/+4dB pad switch), while line sources can be connected to the "Input 2" and "Input 3" phone-jack connectors. Naturally, each input has its own level control, with a master level control for overall output. Two-band EQ gives you further control over the final sound. A convenient clip indicator alerts you if the input signal level is too high, so you can reduce levels to avoid distortion. For larger events the MSR100's special link out jack can be used to connect multiple units for higher power and expanded coverage.
The MSR100 is compact, lightweight, and ready to go anywhere. A built-in handle makes handling easy. You can stand the unit upright for conventional sound reinforcement, or lay it on its angled side for use as a floor monitor. The MSR100 is as rugged as it is versatile, with a durable polypropylene enclosure that stands up to the rigors of the road. A variety of mounting options allow pole mounting, ceiling suspension, or wall mounting, and you can safely stack multiple units on the stage.
Speaker type: 2-way bass reflex powered speaker
LF: 8" cone
HF: 1" compression driver
Frequency response: 55Hz-20kHz (-10dB)
Maximum SPL: 112dB (1m)
Dispersion 90 deg. H x 40 deg. V
Maximum Output Power: 100W at 1kHz
THD=1%, RL=6
Crossover Frequency: 4kHz
Input Sensitivity Input 1: -50dB*/+4dB* (with select SW)
Input 2 & 3: -10dB*
Input Impedance LINE 1 & 2 & 3: 10k
Link Out -10dB*/ 10k
Controls Level Control INPUT 1 & 2 & 3, Master Level
EQ Low: +/-3dB at 60Hz, High: +/-6dB at 10kHz
Power Switch ON/OFF
Connectors Input 1:
Input 2&3:
Link Out: XLR-3-31 (balanced)
Phone (unbalanced)
Phone (unbalanced)
Indicator Green LED: Power on, Red LED: Clip
Dimensions
(W x D x H) 10-7/8"W x 10"H x 18"D
Weight: 11kg; 24.3in
Condition: 8.5/10
Working condition: 100%
Asking $200
Sms Nine 7 eight I 8 eight O 0
The 100-watt power amplifier built into the MSR100 delivers plenty of punch so you'll be heard with full dynamic range and clarity. This specially designed amplifier has been optimized for use with the MSR100 speakers to provide the clearest, cleanest sound possible. An 8" custom woofer handles the low frequencies, while a 1" titanium diaphragm compression driver delivers the highs. The high-frequency horn features wide 90o x 40o dispersion for optimum audience coverage.
A selection of inputs and basic sound control features make the MSR100 ideal for small events and club gigs. A simple but effective mixer built into the rear of the unit provides 3 inputs with master EQ for sound control. The "Input 1" XLR connector accommodates almost any microphone or line input (with a -50dB/+4dB pad switch), while line sources can be connected to the "Input 2" and "Input 3" phone-jack connectors. Naturally, each input has its own level control, with a master level control for overall output. Two-band EQ gives you further control over the final sound. A convenient clip indicator alerts you if the input signal level is too high, so you can reduce levels to avoid distortion. For larger events the MSR100's special link out jack can be used to connect multiple units for higher power and expanded coverage.
The MSR100 is compact, lightweight, and ready to go anywhere. A built-in handle makes handling easy. You can stand the unit upright for conventional sound reinforcement, or lay it on its angled side for use as a floor monitor. The MSR100 is as rugged as it is versatile, with a durable polypropylene enclosure that stands up to the rigors of the road. A variety of mounting options allow pole mounting, ceiling suspension, or wall mounting, and you can safely stack multiple units on the stage.
Speaker type: 2-way bass reflex powered speaker
LF: 8" cone
HF: 1" compression driver
Frequency response: 55Hz-20kHz (-10dB)
Maximum SPL: 112dB (1m)
Dispersion 90 deg. H x 40 deg. V
Maximum Output Power: 100W at 1kHz
THD=1%, RL=6
Crossover Frequency: 4kHz
Input Sensitivity Input 1: -50dB*/+4dB* (with select SW)
Input 2 & 3: -10dB*
Input Impedance LINE 1 & 2 & 3: 10k
Link Out -10dB*/ 10k
Controls Level Control INPUT 1 & 2 & 3, Master Level
EQ Low: +/-3dB at 60Hz, High: +/-6dB at 10kHz
Power Switch ON/OFF
Connectors Input 1:
Input 2&3:
Link Out: XLR-3-31 (balanced)
Phone (unbalanced)
Phone (unbalanced)
Indicator Green LED: Power on, Red LED: Clip
Dimensions
(W x D x H) 10-7/8"W x 10"H x 18"D
Weight: 11kg; 24.3in
Condition: 8.5/10
Working condition: 100%
Asking $200
Sms Nine 7 eight I 8 eight O 0
