little mark III + SVT610 hlf

[Vltras]

little mark 3 + SVT610 hlf


the above is the cabinet



Uploaded with ImageShack.us

little mark 3 on the top
little mark 3 wif svt 610hlf goin at 1950
INPUTS

INPUT
impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR)
impedance 100 Khom, max. voltage 25 Vpp
EFFECT RETURN
impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS

GAIN
-60 dB to +23 dB range
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT
switch on rear panel
PRE/POST EQ
switch on rear panel

EQUALIZATION

LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz-20 kHz (cut)


OUTPUT

LINE OUT
balanced XLR, max. voltage 20 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
SPEAKER OUT
speakon/1/4" combo, 1/4"


OTHER

WEIGHT
6.39 lbs / 2.9 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale)




LF Drivers: 6 x 10”
Voice Coil: 2”
Magnet Weight (each): 30 oz
HF Drivers: Horn/Driver
Voice Coil: 1”
Magnet Weight (each): 8 oz
RMS Power Handling: 600-Watts
Frequency Response (-3dB): 53Hz-18kHz
Usable Low Frequency (-10dB): 42Hz
Nominal Impedance: 4-Ohms
Sensitivity: 98dB
Maximum SPL: 125dB
Dimensions (W x H x D inches): 24 x 40 x 16
Shipping Weight: 135 Pounds
Handling Weight: 110 Pounds

contact 98193526 please arrange own delivery if don't have i can arrange but top up $
Last edited by Vltras; 11-09-11 at 09:56 AM.